The bed-depth effect in the thermal decomposition of carbonates

The effect of sample mass, heating rate and partial pressure of carbon dioxide on TG, DTG and DTA curves for the decomposition of some common carbonates has been investigated. These variables gave a marked effect, similar in magnitude for both DTG and DTA. The effect of sample mass, or depth of undiluted sample, is shown to be due to an increase in the partial pressure of carbon dioxide within the reacting powder. This effect is most pronounced in nitrogen but is much reduced in carbon dioxide. Inert diluents have little effect on the curves since they do not increase the partial pressure of CO₂. The first stage of the decomposition of dolomite (CaMg(CO₃)₂) varies with increasing partial pressure of carbon dioxide in an anomalous manner and hence the effects of these procedural variables (except heating rate) are not similar to those observed for magnesite (MgCO₃) and calcite (CaCO₃). The second stage is, however, strongly dependent on these variables and behaves in a manner that would be predicted for a sample of calcite diluted with magnesite.     

Manifestation of circular photogalvanic current by dynamic holography in BaTiO3

We report the first measurement of the photo-galvanic circular current antisymmetric tensor component in BaTiO₃: Co. The measurement gives a value of this coefficient, for extraordinary beam amplification, of 4×10^–9 A/W using a nonstationary measurement technique at a wavelength of 0.632 m.Professor N. Kukhtarev is on leave from the Institute of Physics in the Ukraine and is supported by the NSFDr. G. Dovgalenko is on leave from the IRPA Rotor-Control research laboratory of the Ukraine and is supported by the University of Arkansas     

Alkene oxidation by a platinum oxo complex and isolation of a platinaoxetane

Oxo complex [(1,5-COD)4Pt4(mu3-O)2Cl2](BF4)2 (1) reacts readily with ethylene and norbornylene. The ethylene reaction yields acetaldehyde and a 1:1 mixture of (1,5-COD)Pt(Cl)(CH2CH3) (2) and [(1,5-COD)Pt4(eta3-CH2CHCH(CH3))](BF4) (3), while the norbornylene reaction yields a platinaoxetane complex, the first metallaoxetane to be obtained from the reaction of an oxo complex and an alkene.     

The photochemical reactions of α,β,γ,δ -unsaturated diazo compounds at low temperature

The α,β:γ,δ-unsaturated tosylhydrazone lithium salts (4) undergo photolysis at ?60°C to give vinylcyclopropenes (10) and [l,2]diazeto[l,4-a] pyrroles (11) and/or (12). The formation of (11, X=H) establishes the intermediacy of (8, X=H) in the formation of the 3$\text{H}$-1,2-diazepine (9). The diazoalkene (5, X=Me) showed opposite electrocyclisation periselectivity to its thermal cyclisation and gave (11, X=Me) $\text{via}$ (8, X=Me), rather than the pyrazoles (2) and (3).     

An examination of some active organometallic substances for ion-selective electrodes

Examinations of a number of possible electroactive substances for use in both liquid membrane and solid-state ion-selective electrodes were carried out. Liquid membrane electrodes incorporating organometallic salts of lead and thallium were considered as constituents of sulphate, chromate, carbonate and nitrate responsive sensors. No practically useful device was, however, found. Several electrically semiconducting metal-phthalocyanines, metal-tetracyanoethylene (TCNE) polymers and metal-coordination polymers were also synthesized and investigated with solid-state electrode constructional techniques. Metal-phthalocyanine electrodes were found to be responsive to anions rather than to cations and some anion selectivity was observed. Metal-TCNE polymer electrodes showed response to metal ions identical with those contained in the polymer, and some good selectivities, operational activity ranges and response times were found. Electrodes made from coordination polymers incorporating copper showed a limited response to copper ions whilst inclusion of cadmium and iron(III) in the polymer matrix produced an electrode with anion reponse and slight anion selectivity.     

Substitution and redox reactions involving vanadium oxotrifluorine

VOF₃ is soluble in acetonitrile but is slowly reduced to give a vanadyl (IV) species as one product. It reacts rapidly with Me₃SiNet₂ in MeCN below ambient temperature; fluorine is replaced by -NEt₂ ligands but the spectroscopic and magnetic properties of the products indicate that, in addition, reduction to V^IV occurs not some extent. The products are formulated as VOF_3-n(NEt₂)_n containing small quantities of VOF_2-m(NEt₂)_m(NEt₂H) (n = 1-3, m = 0-2). A similar reaction occurs between VOF₃ and Me₃SiOMe but with Me₃SiOSiMe₃ only VO₂F is formed.     

Polymers derived from fluoroketones. I. Preparation of fluoroalkyl acrylates and methacrylates

The preparation and physical properties of some perhaloalkyl acrylate and methacrylate esters are discussed. In the synthetic route to the perhaloalkyl esters, acryloyl or methacryloyl chloride is made to react with a metal fluoride—perhaloketone adduct. A side reaction which accompanies esterification is the formation of acryloyl or methacryloyl fluoride. Possible mechanisms for the formation of acyl fluoride and ester are considered. Evidence is presented which suggests that acyl fluoride formation may occur by a breakdown of the fluoroalkyl esters through an intramolecular fluorine shift.     

The elusive 16-electron Cp*M(NO)Me(2)(M = Mo, W) complexes and their spontaneous conversions to Cp*M(NMe)(O)Me isomers.

Treatment of [Cp*Mo(NO)Cl(mu-Cl)](2) with magnesium (Me(2)Mg.dioxane, MeMgCl) or aluminum (Me(3)Al) methylating reagents affords the known compound [Cp*Mo(NO)Me(mu-Cl)](2) (1). Similar treatment of the dichloro precursor with MeLi in ethereal solvents generates an equimolar mixture of 1 and the trimethyl "ate" complex, Cp*MoMe(3)(NO-Li(OEt(2)(n)), (2-Et(2)O). Reaction of 2-Et(2)O with a source of [Me](+) forms Cp*MoMe(3)(=N-OMe)(3), a rare terminal alkoxylimido complex. Metathesis of the chloro ligands of [Cp*Mo(NO)Cl(mu-Cl)](2) by MeLi in toluene at low temperatures produces the target dimethyl complex, Cp*Mo(NO)Me(2) (4), in 75% isolated yield. In solution, 4 is predominantly a monomeric species, whereas in the solid state it adopts a dimeric or oligomeric structure containing isonitrosyl bridges as indicated by IR and (15)N/(13)C NMR spectroscopies. Hydrolysis of 4 affords meso- and rac-[Cp*Mo(NO)Me](2)(mu-O) (5), and the reactions of 4 with a range of Lewis bases, L, to form the 18e adducts Cp*Mo(NO)(L)Me(2) (e.g., Cp*Mo(NO)(PMe(3))Me(2) (7)), have established it to be the most electrophilic complex of its family. Acidolysis of the methyl groups of 4 is also facile. Most notably, 4 is thermally unstable in solution and undergoes isomerization via nitrosyl N-O bond cleavage to its oxo(imido) form, Cp*Mo(NMe)(O)Me (11), which is isolable from the final reaction mixture as the mu-oxo-bridged adduct formed by 4 and 11, i.e., Cp*Mo(NO)Me(2)(mu-O)Cp*Mo(NMe)Me (4 <-- 11). The rate of this isomerization is significantly faster for the tungsten dimethyl complex; hence, Cp*W(NO)Me(2) (12) is not isolable free of a supporting donor interaction and can only be isolated as Cp*W(NO)Me(2)(mu-O)Cp*W(NMe)Me (12 <-- 13) or Cp*W(NO)Me(2)(PMe(3)) (14) adducts.